Upgrade NSX-T 2.4.0 to 2.4.1

From Iwan
Jump to: navigation, search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

We have installed NSX-T 2.4.0 and we want to upgrade to 2.4.1.

This article will show you how to conduct this upgrade

Upgrade Steps

Download upgrade bundle and upload it to the NSX–T Manager

First, we download the upgrade bundle from VMware

Upgrade-nsxt-cluster-25062019-01.png

Then we upload the bundle into the "Upgrade" page of NSX-T.

Upgrade-nsxt-cluster-25062019-02.png

Upgrade-nsxt-cluster-25062019-03.png

Upgrade-nsxt-cluster-25062019-04.png

Upgrade-nsxt-cluster-25062019-05.png

Upgrade-nsxt-cluster-25062019-06.png

Upgrade-nsxt-cluster-25062019-07.png

After an approx. 20 minutes the upgrade bundle is fully uploaded and verified:

Upgrade-nsxt-cluster-25062019-08.png

Begin the Upgrade

Now let's click on "Begin Upgrade"

Upgrade-nsxt-cluster-25062019-09.png

Upgrade-nsxt-cluster-25062019-10.png

Upgrade-nsxt-cluster-25062019-11.png

Run pre–checks

Before we can actually start we first need to click on "Run Upgrade Pre-Checks".

Upgrade-nsxt-cluster-25062019-12.png

Upgrade-nsxt-cluster-25062019-13.png

Upgrade-nsxt-cluster-25062019-14.png

The Edges had some pre-check warnings but nothing critical that we can not continue with the upgrade.

Upgrade-nsxt-cluster-25062019-15.png

Upgrade hosts

Let's click "Next" to start the host upgrades first

Select them all and click on the "Start" button:

Upgrade-nsxt-cluster-25062019-16.png

Upgrade-nsxt-cluster-25062019-17.png

Upgrade-nsxt-cluster-25062019-18.png

It was taking a very long time for NSX-T to put the hosts into maintenance mode and then I discovered that NSX-T could not power-off the VM's of my vApp automatically. So I did a manual power off of the full vApp:

Upgrade-nsxt-cluster-25062019-19.png

And after I did this the install actually really began for the DC1 hosts:

Upgrade-nsxt-cluster-25062019-20.png

For the DC2 hosts I needed to turn off the vApp as well:

Upgrade-nsxt-cluster-25062019-21.png

Upgrade-nsxt-cluster-25062019-22.png

And finally, the hosts were fully upgraded, after NSX-T has put them into maintenance mode and installed the NSX bits on them.

Upgrade-nsxt-cluster-25062019-23.png

Upgrade-nsxt-cluster-25062019-24.png

Upgrade Edge VMs

Let's click "Next" for the Edge upgrades and click on "Start" to start the upgrade:

Upgrade-nsxt-cluster-25062019-25.png

Upgrade-nsxt-cluster-25062019-26.png

And the edges are successfully upgraded as well:

Upgrade-nsxt-cluster-25062019-27.png

Upgrade Controllers

Starting from NSX-T 2.4.0 the Manager and Controllers are collapsed and this means we don't have any separate controllers to upgrade, so this step will be skipped.

Upgrade-nsxt-cluster-25062019-28.png

Let's click next and start with the Managers/Controllers upgrade

Upgrade Managers and Controllers

Click "Start" again here:

Upgrade-nsxt-cluster-25062019-29.png

Upgrade-nsxt-cluster-25062019-30.png

Upgrade-nsxt-cluster-25062019-31.png

At some point the page you are upgrading from will be unavailable:

Upgrade-nsxt-cluster-25062019-32.png

But after 10 minutes you should be able to log back in.

Upgrade-nsxt-cluster-25062019-33.png

Upgrade-nsxt-cluster-25062019-34.png

After a quick check if my cluster is still healthy I noticed that two of the three nodes had a high CPU load.

Upgrade-nsxt-cluster-25062019-35.png

Upgrade-nsxt-cluster-25062019-36.png

And after another 10 minutes I saw that the "SYnc" was in progress:

Upgrade-nsxt-cluster-25062019-37.png

And the sync was completed:

Upgrade-nsxt-cluster-25062019-38.png

Upgrade-nsxt-cluster-25062019-39.png

When I wanted to go back to the "upgrade" page I got this error message:

Upgrade-nsxt-cluster-25062019-40.png

But it just needed some time to start the services and here we can see the final page that every component is nicely upgraded from 2.4.0 to 2.4.1.

Upgrade-nsxt-cluster-25062019-41.png